Balancing Your Camera on HeadPLUS

Properly balancing your camera on HeadPLUS ensures optimal performance and smooth motion control. Here’s a step-by-step guide to help you set it up.

---

How to Attach and Balance Your Camera

1. Align the Bracket:
   
   
   • Make sure the channel on the bracket aligns with the lip on HeadPLUS.
   • Place the bracket correctly and tighten the screw to secure it.
2. Mount the Camera:
   
   
   • Position your camera onto the screw on the bracket.
   • Tighten the bottom screw to secure your camera firmly.
3. Adjust Front-to-Back Balance:
   
   
   • Check if the camera tilts forward or backward when released.
   • If it tilts:
     
     
     • Loosen the bracket screw.
     • Reposition the camera to correct the balance.
     • Tighten the screw again.
4. Adjust Vertical Balance:
   
   
   • If the camera cannot stay upright vertically:
     
     
     • Loosen the connection on HeadPLUS.
     • Adjust until you find the correct balance.
     • Retighten securely.
5. Using the Riser Piece (for Large Lenses):
   
   
   • If balancing is difficult due to a large lens diameter:
     
     
     • Attach the Riser Piece to the camera first.
     • Then secure the camera with the Riser onto the bracket.