Using the HeadPLUS Upside Down on a Jib

You can easily use your HeadPLUS mounted upside down on a jib to achieve creative camera angles. Follow these steps to set it up safely:

---

How to Mount HeadPLUS Upside Down on a Jib

1. Lock the Jib:
   
   
   • Make sure the jib is locked at the center so that vertical (up-down) movements are restricted.
2. Remove Accessories:
   
   
   • Disconnect the laser module and focus/zoom module cables, as cable arrangements will change during the process.
3. Invert the Head:
   
   
   • Loosen the screw at the tip of the jib while supporting the camera securely.
   • Gently tilt the assembly down until it is completely upside down.
   • Once inverted, re-tighten the screw.
4. Adjust the Head Orientation:
   
   
   • Pan the HeadPLUS by 180 degrees.
   • Tilt the camera also by 180 degrees.
5. Reconnect Accessories:
   
   
   • Reattach the cables; note that the ports are now on the front side.
   • Reinstall the laser module if needed.

---

Summary

Now your HeadPLUS is correctly configured to work upside down on a jib, enabling unique shooting perspectives with full motion control functionality.