Balancing Your Camera on HeadONE

How to Attach and Balance Your Camera

1. Attach the L-Bracket:
   
   
   • Mount the L-Bracket onto HeadONE by tightening the thumb screw.
2. Mount the Camera:
   
   
   • Secure your camera onto the L-Bracket using the thumb screw provided.
3. Check Horizontal Balance:
   
   
   • Make sure the lock on HeadONE is open.
   • Hold the camera horizontally and release it gently.
   • If it tips forward or backward, adjust the camera’s position on the L-Bracket:
     
     
     • Loosen the screw, reposition, and tighten again.
4. Check Vertical Balance:
   
   
   • Tilt the camera fully upward.
   • Release it carefully.
   • If it does not stay balanced:
     
     
     • Adjust the position of the L-Bracket on HeadONE by loosening and repositioning it.
5. Final Check:
   
   
   • After achieving both horizontal and vertical balance, your setup is ready for use.