Turntable Module Setup

Setting up the Turntable Module (Medium or Large size) is quick and simple.
Follow these steps to assemble your system correctly for smooth operation.

---

What’s Included in the Box

• Small transparent base plate
• Large transparent top plate
• White matte surface piece
• Black glossy surface piece
• Threaded screw

---

How to Set Up the Turntable Module

1. Prepare the Plates:
   
   
   • Remove the protective films from both the base plate and the top plate.
2. Mount the Base Plate:
   
   
   • Place the base plate on a stable table.
3. Attach HeadONE:
   
   
   • Turn the HeadONE upside down.
   • Screw it onto the base plate gently (do not overtighten).
   • If any reducers are attached to HeadONE, remove them.
4. Secure HeadONE:
   
   
   • Fasten the screw on HeadONE lightly.
   • Make sure HeadONE is locked before proceeding.
5. Attach the Battery:
   
   
   • Install the battery onto HeadONE.
6. Mount the Top Plate:
   
   
   • Place the top plate onto HeadONE.
   • Turn it until it fastens securely.
   • Hold the plate from the sides while fastening (do not overtighten).
7. Unlock and Test:
   
   
   • Once unlocked, the top plate should turn smoothly.
   • Your Turntable Module setup is now complete!