Setting Turntable Anchor Points

When using a Turntable in Point Tracking Mode, it’s important to correctly set Anchor Points.
This ensures that tracking remains accurate even after moving your tripod or adjusting your setup.

---

How to Set Turntable Anchor Points

1. Choose a Point on the Turntable:
   
   
   • Select a point on the closer half of the turntable (not the far side).
   • Aim your camera so the point is centered on the screen.
2. Teach the Point from Two Angles:
   
   
   • Press the physical button on HeadPLUS once.
   • Move your camera slightly to a different angle.
   • Press the button once more to confirm.
3. Rotate the Turntable:
   
   
   • Move the turntable to a new position.
   • Aim at the same point again.
   • Repeat the two-angle teaching process.

✅ After completing this, your Turntable Anchor Point calibration is done!

---

Tracking After Calibration

• When you place a subject on the turntable and teach a point on it:
  
  
  • Point tracking works not only with body motions but also while the turntable rotates.

---

What Happens if You Move the Tripod?

• If the tripod moves, previously taught points may lose alignment.
• Use the Reposition button in the app:
  
  
  • Re-teach the original anchor point using two angles again.
  • This realigns your turntable center perfectly.

---

Summary

Using Turntable Anchor Points helps maintain seamless tracking, even after repositioning equipment, ensuring continuous and professional motion control.